The BSC68000PV Series supports bidirectional power flow, enabling it to function as a high‑speed photovoltaic (PV) array simulator and battery simulator, with fast, seamless switching between sourcing and sinking modes.
| Model | Voltage | Current | Power | Accuracy | Interface | Size | Inquiry |
|---|---|---|---|---|---|---|---|
| BSC68100-100PV | 100V | ±100A | ±3.6kW |
≤±(0.03%+0.02%FS)/≤±(0.05%+0.05%FS) |
RS232/LAN/RS485/CAN |
3U | |
| BSC681500-40PV | 1500V | ±40A | ±18kW |
≤±(0.03%+0.02%FS)/≤±(0.05%+0.05%FS) |
RS232/LAN/RS485/CAN |
3U | |
| BSC682250-25 | 2250V | ±25A | ±18kW |
≤±(0.03%+0.02%FS)/≤±(0.05%+0.05%FS) |
RS232/LAN/RS485/CAN |
3U | |
| BSC681500-80 | 1500V | ±80A | ±30kW |
≤±(0.03%+0.02%FS)/≤±(0.05%+0.05%FS) |
RS232/LAN/RS485/CAN |
3U | |
| BSC682250-60 | 2250V | ±60A | ±30kW |
≤±(0.03%+0.02%FS)/≤±(0.05%+0.05%FS) |
RS232/LAN/RS485/CAN |
3U | |
| No models match the selected filters | |||||||
*Specifications for the product series are subject to change without notice.
• 4-inch non-touch graphical display for real-time MPPT status monitoring of PV inverters
• High power density: up to 30 kW in a 3U chassis
• Master-slave active current sharing; parallel expansion up to 1 MW without performance loss
• High-efficiency energy regeneration
• Built-in battery simulation function
• Fuel cell simulation capability
• Dynamic response time: 2 ms
• Accurately emulates output characteristics of solar PV panels with SiC, thin-film and user-defined parameter profiles
• Simulates I-V curves under various temperature and irradiance conditions
• Built-in dynamic test models compliant with SAS and EN50530 standards, supporting report generation
• Supports static and dynamic MPPT efficiency testing
• Multiple curves are programmable via parameters including Vm, Pm and FF
• Supports piecewise linear (spline) switching function (future development)
• Programmable control with 4096-point high-precision curves. Combined with host PC software, it simulates PV panel output characteristics under dynamic shading conditions
Product Performance
The BSC68PV Series power supplies feature an SAS test interface dedicated to solar‑photovoltaic simulation, supporting MPPT testing for photovoltaic cells, modules and arrays. Within the SAS test interface, users can generate specific V‑I output characteristic curves using external SAS V‑I characteristic parameters or EN50530 regulatory parameters. Once activated, the power supply outputs per the defined I‑V curve. Users can select appropriate methods to generate PV characteristic curves complying with various standards, making the unit well‑suited for performance verification of photovoltaic inverters.


Featuring bidirectional power flow capability, the BSC68 Series can operate as a high‑speed PV array simulator to replicate array characteristics under varying irradiance conditions. It also provides battery simulation, with fast, seamless switching between sourcing and sinking modes. It is widely used for testing and validation of photovoltaic inverters, power conversion systems for energy storage, and PV‑storage integrated systems. In addition, it simulates battery SOC characteristics to evaluate the endurance of battery‑powered products. It helps PV‑storage and battery‑powered product manufacturers reduce costs and boost operational efficiency.
Model | BSC68100-100PV | BSC681500-40PV | BSC682250-25 | BSC681500-80 | BSC682250-60 | |
AC Input | Phase | 1-Phase | 3-phase 3-wire + PE | |||
Voltage | 220VAC±10% | 342VAC~528 VAC | ||||
Frequency | 45~66Hz | |||||
Power Factor | ≥0.99 | |||||
DC Output | Voltage | 0~100V | 0~1500V | 0~2250V | 0~1500V | 0~2250V |
Current | ±100A | ±40A | ±25A | ±80A | ±60A | |
Power | ±3.6kW | ±18kW | ±30kW | |||
Efficiency | ≤95% | |||||
Programming Accuracy | Voltage | ≤±(0.03%+0.02%FS) | ||||
Current | ≤±(0.05%+0.05%FS) | |||||
Power | ≤±0.4%FS | |||||
Readback Accuracy | Voltage | ≤±(0.03%+0.02%FS) | ||||
Current | ≤±(0.05%+0.05%FS) | |||||
Power | ≤±0.4%FS | |||||
Ripple & Noise | RMS | 15mVrms | 220mVrms | 400mVrms | 220mVrms | 400mVrms |
(20Hz-300kHz) | ||||||
P-P | 200 mVpp | 1800 mVpp | 2400 mVpp | 1800 mVpp | 2400 mVpp | |
(20Hz-20MHz) | ||||||
Source Effect | Voltage | ≤0.02%FS (±10%ΔUACInput) | ||||
Current | ≤0.05%FS (±10%ΔUACInput) | |||||
Load Effect | Voltage | ≤0.05%FS(0-100% Load Regulation) | ||||
Current | ≤0.15%FS(0-100%ΔUDC Load Regulation) | |||||
Analog Interface (Optional) | Specifications | Built-in 15-pin D-Sub female connector, electrically isolated | ||||
Signal Range | 0~5V or 0~10V (switchable) | |||||
U / I / P Accuracy | 0~10V: ≤0.2%FS 0~5V: ≤0.4%FS | |||||
Dynamic Response Time | Load-Regulating Settling Time | 2ms | ||||
Output Voltage Rise Time | 20ms(10~90%of full scale) | |||||
forward-reverse transition speed | 2ms(+90%~-90%) | |||||
Protection Functions | OTP ,OVP ,OCP ,OPP ,PF | |||||
Communication Interfaces | Standard: RS232 + LAN Optional: RS485, CAN | |||||
Parallel Operation | Capable of paralleling up to 36 units via a true master-slave configuration over a shared bus. | |||||
Operating Environment | Operating Temperature: 0~50°C, Humidity: <80%, non-condensing;Storage Temperature: -20~70°C, Altitude: <2000m | |||||
Isolation Withstand Voltage | 1000VDC(Output to Earth Ground) | |||||
Dimensions (W×D×H, mm) | 482*455*88 | 444*670*132 | 444*697*132 | |||
Weight | 17kg | 45kg | 55kg | |||