The BSC85000+ Series oscilloscope type DC electronic load displays real‑time voltage and current waveforms, and supports waveform recording, storage, and playback for clear observation of signal variations. The programmable load list enables automatic switching per preset sequences for efficient and precise testing. The built‑in ripple test function accurately assesses power supply ripple and noise. Simulation functions for LED, battery, short‑circuit, and other conditions replicate real‑world load operating scenarios. Seamless switching among constant‑current, constant‑voltage, constant‑resistance and constant‑power modes meets diverse test requirements.
| Model | Voltage | Current | Resolution | Accuracy | Interface | Size | Inquiry |
|---|---|---|---|---|---|---|---|
| BSC8512A+ | 150V | 30A | 0.1mV/0.1mA |
±(0.025%+0.025%FS)/±(0.05%+0.05%FS) |
USB/RS232 |
- | |
| BSC8512B+ | 500V | 15A | 1mV/0.1mA |
±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS) |
USB/RS232 |
- | |
| BSC8512C+ | 120V | 60A | 0.1mV/1mA |
±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS) |
USB/RS232 |
- | |
| BSC8512H+ | 800V | 5A | 1mV/0.1mA |
±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS) |
USB/RS232 |
- | |
| BSC8512A++ | 150V | 30A | 0.1mV/0.1mA |
±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS) |
RS232/USB/LAN |
3U | |
| BSC8512B++ | 500V | 15A | 1mV/0.1mA |
±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS) |
RS232/USB/LAN |
- | |
| BSC8512C++ | 120V | 60A | 0.1mV/1mA |
±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS) |
RS232/USB/LAN |
- | |
| BSC8512H++ | 800V | 5A | 1mV/0.1mA |
±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS) |
RS232/USB/LAN |
- | |
| BSC8513A+ | 150V | 60A | 0.1mV/1mA |
±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS) |
USB/RS232 |
3U | |
| BSC8513B+ | 500V | 30A | 1mV/1mA |
±0.02%+0.025 %FS/0.1%±0.1%FS |
USB/RS232 |
- | |
| BSC8513C+ | 120V | 120A | 0.1mV/1mA |
±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS) |
USB/RS232 |
- | |
| No models match the selected filters | |||||||
*Specifications for the product series are subject to change without notice.
• Full series input voltage: 0 ~ 800 V; input current: 0 ~ 120 A
• 4.3‑inch color LED display for clear and intuitive visual feedback
• Resolution up to 0.1 mV / 0.1 mA for accurate DUT performance testing
• Voltage and current measurement rate up to 100 kHz
• Four operating modes: CV / CC / CR / CP, for easy simulation of loads with various characteristics
• List‑programming support for accurate, high‑speed simulation of complex varying current
• Remote sense terminals are provided to compensate for line voltage drop and improve remote‑measurement accuracy
• OPP / OCP test function with automatic pass/fail judgment to save validation time
• Built‑in voltage rise‑/fall‑time test and ripple‑measurement functions
• Built‑in battery test mode for monitoring battery performance indicators
The BSC85000+ Series oscilloscope type DC electronic load displays real‑time voltage and current waveforms, and supports waveform recording, storage, and playback for clear observation of signal variations. The programmable load list enables automatic switching per preset sequences for efficient and precise testing. The built‑in ripple test function accurately assesses power supply ripple and noise. Simulation functions for LED, battery, short‑circuit, and other conditions replicate real‑world load operating scenarios. Seamless switching among constant‑current, constant‑voltage, constant‑resistance and constant‑power modes meets diverse test requirements. Featuring high accuracy and high resolution, it delivers precise and reliable measurement data.
It supports both dynamic and automated testing. Tests can run automatically per predefined procedures to lower labor costs and human‑induced errors. The unit is equipped with LAN, RS‑232, and USB remote communication interfaces for convenient remote operation. It is compatible with the SCPI protocol used by major manufacturers, facilitating integration into automated test systems. With outstanding stability and usability, the BSC85000+ Series is widely used in R&D and testing of new energy batteries, power supply modules, and charge‑discharge equipment. It simulates battery charge and discharge to evaluate key performance parameters, performs comprehensive tests on power modules, and verifies charge/discharge equipment performance to enhance product quality.
Model | BSC8512A++ | BSC8513A+ | |||
Product Name | DC Electronic Load | DC Electronic Load | |||
Ratings | Input Voltage | 0~150V | 0~150V | ||
Input Current | 0~3A | 0~30A | 0~6A | 0~60A | |
Input Power | 300W | 600W | |||
Minimum Operating Voltage | 0.12V at 3A | 1.2V at 30A | 0.25V at 6A | 2.5V at 60A | |
Constant Voltage (CV) Mode | Range | 0.1~18V | 0.1~150V | 0.1~18V | 0.1~150V |
Resolution | 0.1mV | 1mV | 0.1mV | 1mV | |
Accuracy | ±(0.05%+0.02%FS) | ±(0.05%+0.025%FS) | ±(0.05%+0.02%FS) | ±(0.05%+0.025%FS) | |
Constant Current (CC) Mode | Range | 0~3A | 0~30A | 0~6A | 0~60A |
Resolution | 0.1mA | 1mA | 0.1mA | 1mA | |
Accuracy | ±(0.05%+0.05%FS) | ±(0.05%+0.05%FS) | ±(0.05%+0.05%FS) | ±(0.05%+0.05%FS) | |
Constant Resistance (CR) Mode | Range | 0.1Ω~10Ω | 10Ω~7500Ω | 0.1Ω~10Ω | 10Ω~7500Ω |
Resolution | 16bit | 16bit | |||
Accuracy | 0.01%+0.08S | 0.01%+0.0008S | 0.01%+0.08S | 0.01%+0.0008S | |
Constant Power (CP) Mode | Range | 300W | 600W | ||
Resolution | 1mW | 1mW | |||
Accuracy | ±(0.1%+0.2%FS) | ±(0.2%+0.2%FS) | |||
Dynamic Mode | T1&T2 | 20μS~3600S /Res:1 μS | 100μS~3600S /Res:1 μS | ||
Accuracy | 2μS±100ppm | 10μS±100ppm | |||
Rise/Fall Slew Rate | 0.0001~0.2A/μS | 0.001~1.5A/μS | 0.001~0.15A/μS | 0.01~1A/μS | |
Minimum Rise Time | ≈10uS | ≈10uS | ≈50uS | ≈60uS | |
Voltage Readback | Range | 0~18V | 0~150V | 0~18V | 0~150V |
Resolution | 0.1 mV | 1 mV | 0.1 mV | 1 mV | |
Accuracy | ±(0.025%+0.025%FS) | ±(0.025%+0.025%FS) | ±(0.025%+0.025%FS) | ±(0.025%+0.025%FS) | |
Current Readback | Range | 0~3A | 0~30A | 0~6A | 0~60A |
Resolution | 0.1mA | 1mA | 0.1mA | 1mA | |
Accuracy | ±(0.05%+0.05%FS) | ±(0.05%+0.05%FS) | |||
Power Readback | Range | 300W | 600W | ||
Resolution | 1mW | 1mW | |||
Accuracy | ±(0.1%+0.2%FS) | ±(0.2%+0.2%FS) | |||
Overpower Protection (OPP) | 300W | ≈600W | |||
Overcurrent Protection (OCP) | ≈30A | ≈60A | |||
Short Circuit | CC | ≈3.001/3A | ≈30.033/30A | ≈6.001/6A | ≈60.033/60A |
CV | ≈0.118V | ≈1.18V | ≈0.248V | ≈2.48V | |
CR | ≈40mΩ | ≈40mΩ | ≈30mΩ | ≈30mΩ | |
Input Terminal Impedance | 1MΩ | 280KΩ | |||
Dimensions (W×H×D) | 385.5*109.5*208.5 | 515.5*109.5*208.5 | |||
* Due to layout limitations, only best‑selling models are shown.Contact us for a complete product selection.